Maretron Pressure Transducer 0 to 50 PSI
This item is currently on backorder. You can still place an order, but it will only ship once it’s back in stock.
Pressure Transducer 0 to 50 PSI
All Maretron pressure transducer assemblies are equipped with a 1/4” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system or tank to be monitored with a maximum torque of 150 in-lbs (16.95 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Product Specifications
| Dimensions | 6" L × 5" W × 1" H |
|---|---|
| Shipping Weight | 1 lb |
| Country of Origin | UNITED STATES |
| Harmonized Code | 9026.20.40.00 |
Documentation
| Installation Guide | Download PDF |
|---|
